2. Scanning
44
Scanning a document into the PC 2
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass. (See Pre-Scanning to crop a portion you want to scan on page 38.)
Scanning a document using the ADF 2
a Put the document face up in the ADF.
1 Paper source
2 Picture type
3 Adjust the quality of the scanned picture
4 Page size
b Choose Document Feeder from the Paper source drop-down list (1).
c Choose the picture type (2).
d Choose the Paper size from the drop-down list (4).
1
2
3
4
To Next Page
Loading...
