Brother MFC-8460N - Accessing the Scanner

2. Scanning
35
Accessing the scanner 2
a Open the software application (ScanSoft
®
PaperPort
®
SE) to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft
®
PaperPort
®
SE. If you are
scanning into another software application, the steps may vary.
b Click File, then Scan. Or click the Scan button.
The Scan panel appears in the left side of the screen.
c Choose the scanner you are using from the Scanner drop-down list.
Note
If the machine is connected via:
• Parallel-use Brother MFC-XXXX or Brother DCP-XXXX
• USB-use Brother MFC-XXXX USB or Brother DCP-XXXX USB
•LAN-use Brother MFC-XXXX LAN or Brother DCP-XXXX LAN
If you are using Windows
®
XP/Windows Vista
®
, choose TW-Brother MFC XXXX, not WIA-Brother MFC-
XXXX.
(Where XXXX is your model name.)
d Click Scan.
The Scanner Setup dialog box appears: