143
9
Scanning from a Macintosh
®
9
The Brother machine software includes a TWAIN Scanner driver for Macintosh
®
. You can use this
Macintosh
®
TWAIN Scanner driver with any applications that support TWAIN specifications.
Note
If you want to scan from a machine on a network, choose the networked machine in the DeviceSelector
application located in Macintosh HD/Library/Printers/Brother/Utilities or from the Model pull-down list in
the main screen of ControlCenter2.
For more information, see Configuring network scanning on page 173 or Using ControlCenter2 on page
156 (Network scanning supported in Mac OS
®
X 10.2.4 or greater).
Accessing the scanner 9
Run your Macintosh
®
TWAIN-compliant application. The first time you use the Brother TWAIN driver, set it
as the default driver by choosing Choose Source (or another menu name for choosing the default driver
depending on the application you are using). For each document you scan after this, choose Acquire Image
or Scan. The scanner setup dialog box appears.
Note
The method of choosing the default driver or choosing to scan may vary depending on the application you
are using.
Scanning 9
To Next Page
Loading...
