Brother MFC-8460N - E-Mail

3. ControlCenter2
65
E-mail 3
The Scan to E-mail feature allows you to scan a document to your default E-mail application, so you can
send the scanned job as an attachment. To change the default E-mail application or attachment file type,
right-click the button and click the Software Button tab.
To change the E-mail application, choose your preferred E-mail application from the E-mail Application
drop-down list. You can add an application to the list by clicking the Add button. To delete an application,
click the Delete button.
Note
When you first start ControlCenter2, a default list of compatible E-mail applications will appear in the drop-
down list. If you are having trouble using a custom application with ControlCenter2, you should choose an
application from this list.
If you want to scan a duplex document, check Duplex (two-sided) Scanning and choose Long-edge
binding or Short-edge binding. (Not available for MFC-8460N, MFC-8660DN and DCP-8060)
You can also change the other settings used to create the file attachments.
If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show
Scanner Interface box.