17
8 When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
(For Windows
®
XP)
(For Windows
®
98/98SE/Me/2000)
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine. Brother
recommends that you connect the
machine directly to your computer.
9 Plug in the power cord and turn on the
machine.
0 For Windows
®
98/98SE/Me/
2000 Professional users, click Next.
Windows
®
XP users should wait for a while;
installation of the Brother drivers will start
automatically. The installation screens
appear one after another.
DO NOT try to cancel any of the
screens during this installation.
Continued ...
Installing the Drivers & Software
Setting Up
the machine
Network
Administrators
Windows
®
Parallel
To Next Page
Loading...
