Brother MFC-8870DW - For Wired Network Interface Users; For Wired Network Interface Users (for Windows 98;98 Se;Me;Nt;2000 Professional;Xp;Xp Professional X64 Edition)

Installing the Driver & Software
22
STEP 2
Windows
®
Windows
®
Wired
Network
For Wired Network Interface Users
(For Windows
®
98/98SE/Me/NT/2000 Professional/XP/
XP Professional x64 Edition)
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on page 4 to 11.
1 Turn off and unplug the machine from the AC
outlet.
2 Connect the network interface cable to the
machine, and then connect it to a free port on
your hub.
3 Plug in the power cord and turn on the
machine.
4 Turn on your computer.
(For Windows
®
2000 Professional/XP/
XP Professional x64 Edition/Windows NT
®
4.0,
you must be logged on with Administrator
rights.)
Close any applications running before installing
the MFL-Pro Suite.
Note
Before installation, if you are using personal
firewall software, disable it. Once you are sure that
you can print after the installation, restart your
personal firewall software.
5 Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
6 The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
Note
If this window does not appear, use Windows
®
Explorer to run the setup.exe program from the
root folder of the Brother CD-ROM.