Installing the Driver & Software
35
Macintosh
®
Macintosh
®
USB
For Mac OS
®
9.1 to 9.2
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on page 4 to 11.
1 Turn off and unplug the machine from the AC
outlet and disconnect it from your Macintosh
®
,
if you already connected an interface cable.
2 Turn on your Macintosh
®
.
3 Put the supplied CD-ROM into your CD-ROM
drive.
4 Double-click the Start Here 9.1-9.2 icon to
install the printer and scanner drivers. If the
language screen appears, choose your
language.
5 Click MFL-Pro Suite to install.
6 Follow the on-screen instructions, and restart
your Macintosh
®
.
7 Connect the USB interface cable to your
Macintosh
®
, and then connect it to the
machine.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
8 Plug in the power cord and turn on the
machine.
9 From the Apple
®
menu, click the Chooser.
To Next Page
Loading...
