What does 'Document Jam' mean on my Brother All in One Printer?
The 'Document Jam' message on your Brother All in One Printer indicates that the document was not inserted or fed correctly, or the document scanned from the ADF was too long.
What does 'Drum Stop' mean on my Brother MFC-8950DW All in One Printer?
The 'Drum Stop' message on your Brother All in One Printer indicates that it is time to replace the drum unit. Replace the drum unit.
What does 'Replace Parts Drum Unit' mean on my Brother MFC-8950DW All in One Printer?
The 'Replace Parts Drum Unit' message on your Brother All in One Printer indicates that it is time to replace the drum unit. Replace the drum unit.
Why does my Brother All in One Printer say 'Connection failed to server'?
A 'Connection failed to server' message on your Brother All in One Printer indicates incorrect network or server settings, or a problem with the network or server itself. Confirm that your network settings are correct, or wait and try again later. Also, if the Web button was pressed soon after the machine was turned on, the network connection may not have been established yet; in that case, wait and try again.
How to turn on wireless setting on Brother MFC-8950DW All in One Printer?
To activate the wireless setting on your Brother All in One Printer, turn the wireless setting to ON. If a LAN cable is connected, disconnect it first. On your printer: 1. Press Menu. 2. Navigate to Network using the arrow keys, and press Network. 3. Press WLAN, then Setup Wizard. 4. When WLAN Enable? is displayed, press On. This will start the wireless setup wizard.
What to do if Brother MFC-8950DW All in One Printer cannot detect wireless access point/router?
If your Brother All in One Printer isn't detecting your wireless access point/router: * Ensure the wireless access point/router is powered on. * Move the printer to an area free of obstructions or closer to the router. * Place the printer within about 3.3 feet (one meter) of the router during configuration. * If your router uses MAC address filtering, ensure the Brother printer's MAC address is allowed. If you manually entered the SSID and security information, double-check and correct any errors.
Why am I getting error messages using the Brother Software Scan to FTP feature?
If you receive error messages using the Brother Software Scan to FTP feature, it could be due to several reasons. First, verify the FTP server's IP address or the DNS server address. If the issue persists, double-check your username and password for the FTP server. Another potential cause is an incorrect destination folder setting on the FTP server. Lastly, it may be due to a lack of access rights. If this is the case, contact your network administrator.
Why does my Brother Software show 'Authenticate Err Wrong Date&Time'?
If you're encountering an 'Authenticate Err Wrong Date&Time' error with your Brother Software, it's likely due to incorrect date and time settings on your machine. To resolve this, use the machine's control panel to correctly set the date, time, and time zone. Ensure these settings match those of the server providing authentication.
What to do if Brother Software shows 'Server Time out'?
If you're experiencing a 'Server Time out' error with your Brother Software, the cause might be a wrong host address. If you've used your CIFS server's IP address as the Host Address, double-check the IP address. If you've specified the DNS style, confirm the Host Address, and contact your network administrator for your DNS style address. If you've used your computer name as the Host Address, verify the computer name and contact your network administrator for the WINS server settings.
How to fix Brother Printer when wireless network setup configuration cannot be completed?
If you cannot complete the wireless network setup configuration on your Brother Printer, here are a few things to try: First, turn your wireless router off and then back on, and try configuring the wireless settings again. Second, double-check and make sure you're choosing the correct security settings. You might find these settings on your WLAN access point/router or by contacting your Internet provider or network administrator. Third, confirm that the MAC address of your Brother machine is allowed in the filter; you can usually find this on the printer's control panel. Also, make sure you're typing the correct SSID name or Network Key manually. Lastly, try using the Network Connection Repair Tool.
General| Type | all in one |
|---|---|
| Color | black |
| Tray Capacity | 500 |
| Automatic Document Feeder Capacity | 50 sheets |
| Paper Size | letter, legal, executive, a4, a5, a6, b5, b6, custom sizes from 3" x 5" to 8.5" x 14" |
| Paper Handling | up to 500 sheets |
| Mono Print Speed | 42 pages per minute |
| Print Resolution Mono | up to 1200 x 1200 |
| Maximum Number of Pages Per Month | up to 100, 000 |
| Scanner Type | flatbed |
| Scan Resolution | up to 19200 x 19200 |
| Fax Function | yes |
| Cartridges | tn-720, tn-750, tn-780, dr-720 |
| Number Of Cartridges | 2 |
| Internal Memory | yes |
| Network | wired, wireless |
| Connectivity | usb 2.0 |
| OS Compatibility | windows or mac os |
| Mobile Devices Connection | yes |
Weight and Dimensions| Height | 19.3 inches |
|---|---|
| Width | 16.3 inches |
| Net Weight | 39 pounds |
To Next Page