Brother MFC-9010CN Quick Start Guide

14
Macintosh
USB
For USB Interface Users
(Mac OS X 10.3.9 or greater)
9
Before you install
a Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
10
Connect the USB cable
a Remove the label covering the USB interface
connector.
b Connect the USB cable to the USB connector
on the machine marked with the symbol.
Then connect the cable to your computer.
11
Install MFL-Pro Suite
a Put the supplied CD-ROM into your CD-ROM
drive.
b Double-click Start Here OSX to install.
c Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
IMPORTANT
For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/
.
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
Note
Please see the Software User’s Guide on the
CD-ROM if you want to install the PS driver.
(Brother’s BR-Script Driver)

Brother MFC-9010CN Specifications

General

Brand	Brother
Model	MFC-9010CN
Category	All in One Printer
Language	English