Brother MFC-9120 - Dialing Mode and Prefix Settings; Set Tone or Pulse Dialing Mode; Set Dial Prefix

11
12
Set tone or pulse dialling
mode (not available for
New Zealand)
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a Press Menu, 0, 4.
Initial Setup
4.Tone/Pulse
b Press a or b to choose Pulse (or Tone).
Press OK.
c Press Stop/Exit.
13
Dial Prefix
The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number this setting will automatically dial 9
for every fax you send.
a Press Menu, 0, 6 (For New Zealand, press 5).
b Enter the prefix number (up to 5 digits) on the
dial pad, and then press OK.
c Press Stop/Exit.
Note
You can use the number 0 to 9, #, l and !. (Press
Hook to display “!”.)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed break
recall (hookflash), press Hook to enter the break