2
2
Remove the packing
material from the
machine
DO NOT eat the silica gel pack, please throw it
away. If ingested, seek medical attention
immediately.
a Remove the packing tape from the outside of
the machine, the silica gel pack on the support
flap and the film covering the scanner glass.
b Fully open the top cover by lifting the handle up
a.
c Slide all eight yellow drum locks in the direction
of the arrows (the locks may require a firm
push).
d Take out all four drum and toner cartridge
assemblies.
DO NOT connect the AC power cord yet.
To avoid print quality problems, DO NOT touch
the shaded part shown in the illustration.
To Next Page
Loading...
