20
For Wireless Network Users
For Wireless Network Interface Users
(MFC-9330CDW / MFC-9340CDW)
16
Before you begin
Infrastructure Mode
• If you are going to connect the machine to your network, we recommend that you contact your system
administrator prior to installation. You must know your wireless network settings before you proceed with this
installation.
• If you have previously configured the wireless settings of the machine, you must reset the network settings
before you can configure the wireless settings again.
1. On your machine, press , and All Settings.
2. Swipe up or down, or press a or b to display Network, and press Network.
3. Swipe up or down, or press a or b to display Network Reset, and press Network Reset.
4. Press Yes.
5. Press Yes for two seconds.
a Wireless access point/router
b Wireless Network machine (your machine)
c Wireless capable computer connected to
the wireless access point/router
d Wired computer connected to the wireless
access point/router
e Mobile device connected to the wireless
access point/router
To Next Page
Loading...
