Why does my Brother MFC-9180 All in One Printer say 'COOLING DOWN WAIT FOR A WHILE'?
The message 'COOLING DOWN WAIT FOR A WHILE' on your Brother All in One Printer indicates that the temperature of the drum unit or toner cartridge is too high. You must wait and allow the machine to resume printing when it is ready.
What to do if my Brother MFC-9180 says 'CHANGE TONER'?
If your Brother All in One Printer's display shows 'CHANGE TONER', you can continue printing for a short time. However, this message indicates that the toner is low and will soon run out. You should order a new toner cartridge now.
What does 'CHECK DRUM UNIT' mean on my Brother MFC-9180 All in One Printer and how to fix it?
The 'CHECK DRUM UNIT' message on your Brother All in One Printer indicates that the drum unit is not installed. Reinstall the drum unit to resolve this issue.
How do I fix 'COVER OPEN PLS CLOSE COVER' error on my Brother MFC-9180?
The 'COVER OPEN PLS CLOSE COVER' error on your Brother All in One Printer means that the top cover was not completely closed. To fix this, open the cover and then close it securely.
What to do if my Brother MFC-9180 says 'PLS OPEN COVER'?
If your Brother All in One Printer displays 'PLS OPEN COVER', it indicates that a page, a piece of paper, a paper clip, or another object may be jammed inside the machine. Open the top cover and remove the drum unit. If you see any jammed paper or other item, gently pull it out. Reinstall the drum unit, then close the top cover.
Why does my Brother All in One Printer say 'CHECK PAPER'?
The 'CHECK PAPER' message on your Brother All in One Printer indicates that the machine is either out of paper or the paper is not loaded correctly in the Multi-purpose Sheet Feeder. To resolve this, refill the paper or remove the paper and load it again, and then press Fax Start.
Why can't my Brother MFC-9180 All in One Printer print full pages and shows an 'OUT OF MEMORY' error?
Reduce the printer resolution on your Brother All in One Printer. Reduce the complexity of your document and try again. Reduce the graphic quality or the number of font sizes within your application software.
Why is my Brother MFC-9180 All in One Printer not printing?
Make sure the Brother All in One Printer is plugged in, the toner cartridge and drum unit are installed properly, and the interface cable is securely connected between the machine and computer. Check to see if LCD is showing an error message.
How to resolve 'OUT OF MEMORY' error on Brother All in One Printer when printing?
If your Brother All in One Printer displays an 'OUT OF MEMORY' error when used as a printer, the machine memory capacity has been exceeded. If you have installed the Windows® driver, try again after setting the True Type mode to 'Print as Graphics' in the PRINT menu of your application software. Reduce the print resolution or reduce the complexity of your document.
What to do if my Brother MFC-9180 All in One Printer says 'TONER EMPTY'?
If your Brother All in One Printer displays 'TONER EMPTY', it means that the toner is used up and printing is no longer possible, or the toner cartridge is not installed into the drum unit. Replace the toner cartridge with a new one, or install the toner cartridge into the drum unit. (See Replacing the Toner Cartridge, page 131.)
General Copier Specifications| engine laser speed | 10 copies per minute |
|---|---|
| modem speed | 14, 400 bps |
| resolution | 600 x 300 dpi |
Scanner Specifications| optical resolution | 600 x 2, 400 dpi |
|---|---|
| interpolated resolution | 9, 600 x 9, 600 dpi |
| CPU speed | 100MHz |
Memory and Capacity| total memory capacity | 8 MB |
|---|---|
| memory back-up | 4 days |
| ADF capacity | 30 sheets |
Printer Specifications| print speed | 10 pages per minute |
|---|---|
| resolution | 600 x 600 dpi |
| paper capacity | 200 sheets |
Fax Weights and Measures| dimensions | 459mm width x 458mm depth x 354mm height |
|---|---|
| weight | 11 Kg |
| power consumption (sleep) | 15 w or less |
To Next Page
