8
7
Set your Station ID
Set the machine's Station ID if you want the date and
time to appear on each fax you send.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Station ID.
Press Station ID.
e Press Fax.
f Enter your fax number (up to 20 digits) using
the numbers on the Touchscreen, and then
press OK.
g Press Tel.
h Enter your telephone number (up to 20 digits)
using the numbers on the Touchscreen, and
then press OK. (If your telephone number and
fax number are the same, enter the same
number again.)
i Press Name.
j Use the Touchscreen to enter your name (up to
20 characters), and then press OK.
k Press .
8
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Advanced
User's Guide: Printing reports.
9
Set the telephone line
compatibility
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Compatibility.
Press Compatibility.
e Press Basic(for VoIP).
f Press .
• To enter numbers or special characters, press
repeatedly until the character you want to
enter appears, then press the character you
want.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, then press .
• To enter a space, press Space.
• For more details, see Entering Text on page 33.
If you are using an analog telephone line, skip this
step.