EasyManuals Logo

Brother MFC-9340CDW Product Safety Guide

Brother MFC-9340CDW
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.
These slots and openings are provided for ventilation. Blocking the product’s ventilation could
create a risk of overheating and/or fire.
Instead:
Keep a gap of at least 150 mm between the ventilation hole and the wall.
Place the product on a solid level surface.
DO NOT place this product near or over a radiator or heater.
DO NOT place this product in a “built-in” installation unless adequate ventilation is provided.
CAUTION
This product emits some chemical substances during printing, and additionally if used for
prolonged periods or in poorly ventilated areas may cause the emission of odorous gases such
as ozone. Place the product in a well ventilated area for optimum performance and comfort.
Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the
product is in a safe location where it cannot be accidentally knocked over, which could cause
injury to you or others and serious damage to the product. Also ensure that cords are secured
so as not to pose a tripping hazard.
DO NOT connect your product to electrical sockets controlled by wall switches or automatic
timers, or to the same circuit as large appliances, such as an air conditioner, copier, shredder,
etc. that might disrupt the power supply.
DO NOT eat the silica gel pack, please throw it away. If ingested seek medical attention
immediately.
DO NOT place heavy objects on the product.
DO NOT place this product on an unstable cart, stand, or table. The product is heavy and may
fall, causing injury to you and serious damage to the product. For MFC and DCP products, there
is an added risk of injury if the scanner glass should break. Particularly, if you have children,
please make sure the product is located in a safe position.

Other manuals for Brother MFC-9340CDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-9340CDW and is the answer not in the manual?

Brother MFC-9340CDW Specifications

Printing Specifications IconPrinting Specifications
print speed (black)up to 23 ppm
print speed (color)up to 23 ppm
print resolutionup to 600 x 2400 dpi
automatic duplex printingYes
Copying Specifications IconCopying Specifications
copy speed (black)up to 23 cpm
copy speed (color)up to 23 cpm
copy resolution600 x 600 dpi
copy reduction/enlargement25% - 400% in 1% increments
Scanning Specifications IconScanning Specifications
scanner typeColor Flatbed with ADF
document glass size8.5” x 11.7”
scan resolution (optical)1200 x 2400 dpi
scan resolution (interpolated)19200 x 19200 dpi
Fax Specifications IconFax Specifications
fax modem33.6k bps
fax page memoryup to 500 pages
speed dial locations200
Memory and Interfaces IconMemory and Interfaces
memory (standard/max)192MB / 192MB
standard interfacesWireless 802.11b/g/n, Ethernet, Hi-Speed USB 2.0
usb direct interfaceYes
Supplies and Accessories IconSupplies and Accessories
black toner cartridge yield2, 500 pages
cyan toner cartridge yield (standard)1, 400 pages
magenta toner cartridge yield (standard)1, 400 pages
yellow toner cartridge yield (standard)1, 400 pages
cyan toner cartridge yield (high capacity)2, 200 pages
magenta toner cartridge yield (high capacity)2, 200 pages
yellow toner cartridge yield (high capacity)2, 200 pages
drum unit yield15, 000 pages
belt unit yield50, 000 pages
waste toner box yield50, 000 pages
multi-purpose paperLetter, 500 sheets

Related product manuals