Brother MFC-9560CDW - Page 169

Menu and features
153
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
7.Network
(MFC-9560CDW)
1.Wired LAN 1.TCP/IP 1. Boot Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address [000-255]. [000-255].
[000-255]. [000-255]
Enter the IP address.
3. Subnet Mask [000-255]. [000-255].
[000-255]. [000-255]
Enter the Subnet
mask.
4.Gateway [000-255]. [000-255].
[000-255]. [000-255]
Enter the Gateway
address.
5.Node Name BRNXXXXXXXXXXXX Enter the Node
name.
6. WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7. WINS Server Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
WINS server.
8.DNS Server Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
DNS server.
9.APIPA On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
0.IPv6 On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://solutions.brother.com/
for more information.
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.