Brother MFC-9560CDW - Deleting One Touch and Speed Dial Numbers

Dialing and storing numbers
49
7
c Edit the number and name by the
following the instruction. When you are
finished editing, press OK.
 To edit the stored name or number,
press d or c to position the cursor
under the character you want to
change and press Clear. Then enter
the correct character.
d If you want to save a fax resolution along
with the number, do one of the following:
 To store the fax resolution,
press a or b to select Std, Fine,
S.Fine or Photo.
Press OK.
 Press OK if you don't want to change
the default resolution.
e Press Stop/Exit.
Deleting One Touch and
Speed Dial numbers 7
You can delete a One Touch or Speed Dial
number that has already been stored. The
LCD will show the name or number, and if the
number has a scheduled job, such as a
delayed fax or a fax forwarding number, it will
display a message.
a Do one of the following:
 To delete a stored One Touch
number, press Menu, 2, 3, 1.
23.Address Book
1.One Touch Dial
One Touch:
Select One Touch
Press the One Touch key number
you want to change.
 To delete a stored Speed Dial
number, press Menu, 2, 3, 2.
23.Address Book
2.Speed Dial
Speed Dial? #_
Enter & OK Key
Enter the Speed Dial number you
want to change then press OK.
b To delete the stored data, press 2.
23.Address Book
#005:MIKE
a 1.Change
b 2.Clear
Select ab or OK