Brother MFC-9560CDW - How to Set a New Default for the File Size (for Scan to E-Mail (E-Mail Server)); How to Set a New Default for the Duplex Scan Mode (for Scan to E-Mail (E-Mail Server)) (for MFC-9465 CDN and MFC-9560 CDW)

Control panel setup
31
3
How to set a new default for the file size
(For Scan to E-mail (E-mail server)) 3
You can set your own default setting for the file size. For a higher quality scan, choose the large file size. For
a smaller file size, choose the small file size.
a Press Menu, 1.
b Press a or b to choose Document Scan. Press OK.
c Press a or b to choose File Size. Press OK.
d Press a or b to choose 1.Color or 2.Gray. Press OK.
e Press a or b to choose Small, Middle or Large. Press OK.
f Press Stop/Exit.
Note
You cannot choose the file size when you scan a document in black and white. Black and white documents
will be stored in the TIFF file format and the data will not be compressed.
How to set a new default for the Duplex Scan mode
(For Scan to E-mail (E-mail server)) (For MFC-9465CDN and MFC-9560CDW) 3
You can set your own default setting for the Duplex Scan mode. You can choose from two types of layout,
long edge or short edge.
a Press Menu, 1.
b Press a or b to choose Document Scan. Press OK.
c Press a or b to choose Duplex Scan. Press OK.
d Press a or b to choose Long edge or Short edge . Press OK.
e Press Stop/Exit.