3
How to connect the
Optional Paper Tray
THANK YOU!
… FOR PURCHASING YOUR BROTHER MACHINE.
WE ARE SURE YOU WILL BE IMPRESSED WITH THE CONVENIENT WAY THAT
YOUR NEW MACHINE PERFORMS SO MANY TASKS WITH GREAT RESULTS!
Follow these simple instructions in numerical order.
For greater detail, consult your Owner’s Manual and CD-ROM.
Alternatively, if you cannot solve a problem:
Refer to Frequently Asked Questions (FAQ’s) on Brother Solutions Web Site:
URL: http://solutions.brother.com
Packing List
Keep the packing materials for possible future transport. If you do not pack the machine
properly, it may void your warranty.
Document Tray
with Extension
Owner’s Manual
Brother Quick
Setup Guide
CD-ROM
Drum Unit Assembly
(TN-6300)
Document Support
IEEE-1284 Compliant
Bi-directioned Cable
Telephone Line Cord
Mains Power Cord
Adapter
(For Australia Only)
Quick Reference
Guide (For Asia Only)
Extension
Telephone
TAD
TAD
External
Telephone
(Example for Australia)
– 1 –
MFC-9660
Quick Setup Guide
24
1
5
Attach the
Trays
Install the Drum Unit
Load Paper
67
89
10
Install Mains Power
Cord and Telephone
Line Cord
Sharing a Single Line
with a Telephone
Answering Device
(TAD) or an External
Telephone
Selecting Receive Mode Set Station IDSet Date and
Time
A. Pull the paper cassette
completely out of the
machine.
B. Adjust the paper guides at
the right and rear of the
paper cassette for the paper
size you want.
C. Load paper in the
paper cassette. Press
down on the paper to
flatten it in all four
corners, keeping the paper
level below the guide.
D. Slide the paper cassette into
the machine until it locks into
place.
A. Unpack the drum unit assembly,
and gently rock it from side to side
five or six times to distribute the
toner evenly
inside the
cartridge.
C. Open the front cover
of the machine.
To prevent damage to the drum,
do not expose it to light for longer
than a few minutes.
B. Remove the
protective part.
D. Insert the drum unit
assembly into the
machine.
Choose the mode that best suits your needs by pressing Mode
repeatedly until you have changed the FAX and FAX/TEL lights to
the setting you want to use.
(
means light off. means light on.)
TAD
FAX
FAX/TEL
For use with a dedicated fax line.
Every call is answered as a fax.
TAD
FAX
FAX/TEL
For receiving fax and voice calls on one line.
The machine will automatically receive Faxes. If the call
is a voice call, the machine will pseudo ring to alert you
to pick up the phone.
TAD
FAX
FAX/TEL
For use with an external answering device.
The TAD answers every call and stores voice messages.
Fax messages are printed.
Make sure that TAD is connected to the external jack.
TAD
FAX
FAX/TEL
You control the phone line and must answer every call
yourself.
For more details, see
Receive Mode Settings
in Owner’s Manual.
A. Press Menu,
1
,
1
.
1.DATE/TIME
YEAR:XX
ENTER & SET KEY
B. Enter the last two digits of the year and
press Set.
MONTH:XX
ENTER & SET KEY
C. Enter two digits for the month and press
Set.
DAY:XX
ENTER & SET KEY
D. Enter two digits for the day and press Set.
TIME:XX:XX
ENTER & SET KEY
E. Enter the time in 24-hour format and press
Set.
F. Press Stop/Exit.
Note: If you can’t step forward, press
Stop/Exit and repeat from Step A.
A. Press Menu,
1
,
2
.
2.STATION ID
FAX:
ENTER & SET KEY
B. Enter your fax number, then press Set.
C. Enter your telephone number, then press Set.
D. Enter your name using the dial pad and the chart
below, then press Set. Press
twice to create
blank space.
E. Press Stop/Exit.
For more details,
see
Entering Text
in
Owner’s Manual.
Press Key
2
3
4
5
6
7
8
9
once
A
D
G
J
M
P
T
W
twice
B
E
H
K
N
Q
U
X
three times
C
F
I
L
O
R
V
Y
four times
2
3
4
5
6
S
8
Z
five times
A
D
G
J
M
7
T
9
Complete reading this guide before connecting
the Parallel or USB cables.
E. Close the front cover.
A. Carefully pick up the
machine and place it on
top of the
Optional
Paper Tray
(Lower Tray).
Mains Power Cord Telephone Line Cord
Maximum
Paper
Height
Guide
Document
Support
Document Tray
with Extension
B. Plug the modular cable
from the Lower Tray into
the modular jack on the
machine.
To select which tray will be used for faxes or for copies, see
Lower
Tray (With Optional Paper Tray Only)
and for printer setting, see
Paper Source
in the Owner’s Manual on the CD-ROM.
If you move the machine after connecting the Lower Tray, be sure
to carefully lift the Lower Tray with the machine because they are
not fixed together.
Note: If you can’t step forward, press Stop/Exit and
repeat from Step A.
Note: If you are using an external
answering machine, “TA D ”
should be selected as the
receive mode in Step 8.
To Next Page
Need help?
General
