Brother MFC-J1300DW - Page 617

Level 1 Level 2 Level 3 Level 4 Descriptions
Wi-Fi Direct PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group Owner.
Device
Information
Device Name
- View your machine's device name.
SSID
- View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
IP Address
- View your machine's current IP Address.
Status
Information
Status
- View the current Wi-Fi Direct network
status.
Signal
- View the current Wi-Fi Direct network
signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
I/F Enable
- - Turn the Wi-Fi Direct connection on or
off.
NFC
(MFC-J1300DW)
- - - Turn the NFC function on or off.
Message from
Brother
Message from
Brother
- - Display messages and notifications from
Brother.
Status
- -
Web Connect
Settings
Proxy Settings Proxy
Connection
- Change the Web connection settings.
Address
-
Port
-
User Name
-
Password
-
Network I/F
(MFC-J1300DW)
- - - Select the network connection type.
WLAN Enable
(DCP-J1100DW)
- - - Turn wireless network connection On or
Off.
IPsec
- - - IPsec is an optional security feature of
the IP protocol that provides
authentication and encryption services.
We recommend contacting your network
administrator before changing this
setting.
Network Reset
- - - Restore all network settings back to the
factory settings.
[Print Reports]
[Settings] > [All Settings] > [Print Reports]
Level 1
Descriptions
XMIT Verify
(MFC models)
Print a Transmission Verification Report for your last transmission.
610