Brother MFC-J200 - Making copies; How to copy; Stop copying; Copy options

6
6
Set the date and time
The LCD displays the date and time. You can also
add the current date and time to each fax you send by
setting your Station ID (see step 10).
a When the LCD shows this message, press OK.
Date&Time
q
Enter & OK Key
b Enter the last two digits of the year on the dial
pad, and then press OK.
c Enter the two digits for the month on the dial
pad, and then press OK.
d Enter the two digits for the day on the dial pad,
and then press OK.
e Press a or b to choose 12h Clock or 24h
Clock, and then press OK.
f Enter the time on the dial pad, and then press
OK.
(12h Clock only)
Press a or b to choose AM or PM, and then
press OK.
7
Wireless setup
(if needed)
Setup Wi-Fi? message appears on the LCD.
For wireless setup using a mobile device, go to a.
For Windows
®
and Macintosh users, go to b.
a Press 1 to choose 1.Yes.
Go to step 13 on page 15 to continue with the
wireless setup.
b Press 2 to choose 2.No.
Wireless setup instructions for Windows
®
and
Macintosh users will be covered later, starting
on page 15.
NOTE
You can change date, time, or clock type (12h or
24h) at any time. For more information uuBasic
User’s Guide: Setting the date and time
NOTE
If you want to configure any of the options in
steps 8-11, you can choose 2.No in step a, and
then go to step 8.
You will be able to configure the wireless settings
later.