Brother MFC-J200 - General setup; Memory Storage; Setting Daylight Saving Time; Automatic Daylight Saving Time

8
10
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
If you are not using this machine for faxing, go to the
next step.
a Press Menu, 0, 2.
2.Station ID
b Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a “+” for
international codes, press l.
c Enter your name (up to 20 characters) using
the dial pad, and then press OK.
d Press Stop/Exit.
11
Set Tone or Pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling (rotary) service, you need to
change the dialling mode.
a Press Menu, 0, 3.
3.Tone/Pulse
b Press a or b to choose Pulse (or Tone).
Press OK.
c Press Stop/Exit.
NOTE
If you make a mistake and want to start again,
press Stop/Exit and go back to a .