What does 'Ink Absorber NearFull' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Ink Absorber NearFull', it means the ink absorber box or flushing box is nearly full. Contact Brother customer service or your local Brother dealer.
What does 'Ink Absorber Full' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Ink Absorber Full', it means the ink absorber box or flushing box is full. The ink absorber box or flushing box will need to be replaced. Contact Brother Customer Service or your local Brother Authorised Service Centre to have your machine serviced.
Why does my Brother MFC-J3520 All in One Printer have vertical black lines when sending faxes?
If you see vertical black lines on faxes you send from your Brother All in One Printer, it is typically caused by dirt or correction fluid on the glass strip. Clean the glass strip.
What does 'Data Remaining in Memory' mean on my Brother MFC-J3520?
If your Brother All in One Printer displays 'Data Remaining in Memory', it means print data is left in the machine's memory. Press . The machine will cancel the job and clear it from the memory. Try to print again.
How to fix 'Cannot Print Replace ink' on my Brother MFC-J3520?
If your Brother All in One Printer displays 'Cannot Print Replace ink', it means one or more of the ink cartridges have reached the end of their life. You will need to replace the ink cartridges to continue printing.
How to fix 'Touchscreen Init. Failed' error on Brother MFC-J3520 All in One Printer?
If your Brother All in One Printer displays 'Touchscreen Init. Failed', it may be because: * The Touchscreen was pressed before the power on initialization was completed. Make sure that nothing is touching or resting on the Touchscreen, especially when plugging the machine in. * Debris may be stuck between the lower part of the Touchscreen and its frame. Insert a piece of stiff paper between the lower part of the Touchscreen and its frame and slide it back and forth to push out the debris.
What to do if my Brother MFC-J3520 All in One Printer shows 'Unable to Clean', 'Unable to Initialize' or 'Unable to Print'?
If your Brother All in One Printer displays 'Unable to Clean XX', 'Unable to Initialize XX', or 'Unable to Print XX', it could be due to a mechanical problem or a foreign object inside the machine. Open the scanner cover and remove any foreign objects and paper scraps from inside the machine. If the error message continues, disconnect the machine from the power for several minutes, and then reconnect it.
What does 'Ink Low' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Ink Low', it means one or more of the ink cartridges are near the end of their life. Order a new ink cartridge. You can continue printing until the Touchscreen shows Cannot Print.
Why does my Brother All in One Printer say 'Cover is Open'?
If your Brother All in One Printer shows 'Cover is Open', it means either: * The scanner cover is not locked in the closed position. Lift the scanner cover, and then close it again. * The ink cartridge cover is not locked in the closed position. Firmly close the ink cartridge cover until it locks into place.
What does 'Out of Fax Memory' mean on my Brother MFC-J3520 All in One Printer?
If your Brother All in One Printer displays 'Out of Fax Memory', it means the fax memory is full.
General| Print Technology | Inkjet |
|---|---|
| Duplex Printing | Yes |
| Fax Modem Speed | 33.6 kbps |
| Functions | Print, Copy, Scan, Fax |
| Standard Paper Capacity | 250 sheets |
| Mobile Printing | Yes |
| Max Print Resolution | 6000 x 1200 dpi |
| Scanner Type | Flatbed + ADF |
| Max Scan Resolution | 1200 x 2400 dpi |
| Connectivity | USB, Ethernet, Wi-Fi |
| Automatic Document Feeder (ADF) | Yes |
| Ink Cartridges | Black, Cyan, Magenta, Yellow |
| Print Speed (Black) | Up to 35 ppm (draft), 12 ppm (ISO) |
| Print Speed (Color) | 27 ppm |
| Display | 2.7" Touchscreen Color LCD |
Instructions for loading paper into the main paper trays.
How to load documents into the Automatic Document Feeder (ADF).
Basic steps to send a fax using ADF or scanner glass.
Selecting the appropriate mode for receiving faxes.
Sending documents from a PC as a fax.
How to dial manually or from the Address Book.
Steps for making a basic copy and stopping the process.
Adjusting paper type, size, tray selection, and ADF speed.
Overview of printing photos from media without a computer.
Steps to install the necessary Brother printer driver.
Step-by-step guide for replacing ink cartridges.
Initial checks and common problem categories.
List and explanation of common error messages and their solutions.
To Next Page
