EasyManuals Logo

Brother MFC-J410W Advance User Guide

Brother MFC-J410W
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Dialing and storing numbers
17
5
Converting telephone wall outlets 5
There are three ways to convert to an RJ11
jack. The first two ways may require help from
the telephone company. You can change the
wall outlets from one RJ14 jack to two RJ11
jacks. Or you can have an RJ11 wall outlet
installed and slave or jump one of the
telephone numbers to it.
The third way is the easiest: Buy a triplex
adapter. You can plug a triplex adapter into
an RJ14 outlet. It separates the wires into two
separate RJ11 jacks (Line 1, Line 2) and a
third RJ14 jack (Lines 1 and 2). If your
machine is on Line 1, plug the machine into
L1 of the triplex adapter. If your machine is on
Line 2, plug it into L2 of the triple adapter.
Triplex Adapter
5
Installing machine, external two-line
TAD and two-line telephone
5
When you are installing an external two-line
telephone answering device (TAD) and a
two-line telephone, your machine must be
isolated on one line at both the wall jack and
at the TAD. The most common connection is
to put the machine on Line 2, which is
explained in the following steps. The back of
the two-line TAD must have two telephone
jacks: one labeled L1 or L1/L2, and the other
labeled L2. You will need at least three
telephone line cords, the one that came with
your machine and two for your external two-
line TAD. You will need a fourth line cord if
you add a two-line telephone.
a Put the two-line TAD and the two-line
telephone next to your machine.
b Plug one end of the telephone line cord
for your machine into the L2 jack of the
triplex adapter. Plug the other end into
the LINE jack on the back of the
machine.
c Plug one end of the first telephone line
cord for your TAD into the L1 jack of the
triplex adapter. Plug the other end into
the L1 or L1/L2 jack of the two-line TAD.
d Plug one end of the second telephone
line cord for your TAD into the L2 jack of
the two-line TAD. Plug the other end into
the EXT. jack on the left side of the
machine.
1 Triplex Adapter
2 Two Line Telephone
3 External Two Line TAD
4 Machine
You can keep two-line telephones on other
wall outlets as always. There are two ways to
add a two-line telephone to the machine's
wall outlet. You can plug the telephone line
cord from the two-line telephone into the
L1+L2 jack of the triplex adapter. Or you can
plug the two-line telephone into the TEL jack
of the two-line TAD.
RJ14
RJ11
RJ14
1
2
3
4

Table of Contents

Other manuals for Brother MFC-J410W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J410W and is the answer not in the manual?

Brother MFC-J410W Specifications

General IconGeneral
Dimensions (WxDxH)390 x 370 x 180 mm
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionscopy, fax, print, scan
Duplex printingNo
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Maximum duty cycle- pages per month
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Grayscale levels256
Input color depth36 bit
Output color depth24 bit
Image formats supportedJPG, TIF
Optical scanning resolution1200 x 2400 DPI
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
Auto document feeder (ADF)Yes
Auto document feeder (ADF) input capacity15 sheets
Envelopes sizes10, C5
Maximum print size216 x 356 mm
Paper tray media typesCoated paper, Envelopes, Glossy paper, Plain paper, Transparencies
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Photo paper sizes (imperial)4x6, 5x7 \
Borderless printing media sizes4x6, 5x7, A4, Letter
Maximum ISO A-series paper sizeA4
Display-
Market positioningHome & office
Standard interfacesUSB 2.0, Wireless LAN
USB 2.0 ports quantity1
Internal memory32 MB
Compatible memory cardsMemory Stick (MS), MS Duo, MS PRO, MS PRO Duo
Sound pressure level (printing)50 dB
Power consumption (off)0.65 W
Power consumption (standby)4 W
Power consumption (average operating)19 W
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesENERGY STAR

Related product manuals