Brother MFC-J410W

General setup
3
1
Automatic Daylight
Saving Time
1
You can set the machine to change
automatically for daylight saving time. It will
reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date&Time setting.
The factory setting is Off, so you will have to
turn on Automatic Daylight Saving Time as
follows.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Auto Daylight.
Press OK.
d Press a or b to choose On (or Off).
Press OK.
e Press Stop/Exit.
Sleep Mode 1
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Sleep Mode.
Press OK.
d Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins.
Press OK.
e Press Stop/Exit.