EasyManuals Logo

Brother MFC-J410W Advance User Guide

Brother MFC-J410W
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
42
j After cleaning is finished, press
Color Start.
The machine starts printing the Print
Quality Check Sheet again. Return to
step f.
k Press Stop/Exit.
If you repeat this procedure at least five
times and the print quality is still poor,
replace the ink cartridge for the clogged
color.
After replacing the ink cartridge, check
the print quality. If the problem still
exists, repeat the cleaning and test print
procedures at least five times for the
new ink cartridge. If ink is still missing,
call Brother Customer Service. (See
Brother numbers on page i in the Basic
User’s Guide.)
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
Note
Checking the print alignment A
You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become
faded.
a Press Menu.
b Press a or b to choose Ink.
Press OK.
c Press a or b to choose Test Print.
Press OK.
d Press a or b to choose Alignment.
Press OK.
e Press Black Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
f Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
g Do one of the following:
If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check and go to
step j.
If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
h For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
i For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
j Press Stop/Exit.
i
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.

Table of Contents

Other manuals for Brother MFC-J410W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J410W and is the answer not in the manual?

Brother MFC-J410W Specifications

General IconGeneral
Dimensions (WxDxH)390 x 370 x 180 mm
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionscopy, fax, print, scan
Duplex printingNo
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Maximum duty cycle- pages per month
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Grayscale levels256
Input color depth36 bit
Output color depth24 bit
Image formats supportedJPG, TIF
Optical scanning resolution1200 x 2400 DPI
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
Auto document feeder (ADF)Yes
Auto document feeder (ADF) input capacity15 sheets
Envelopes sizes10, C5
Maximum print size216 x 356 mm
Paper tray media typesCoated paper, Envelopes, Glossy paper, Plain paper, Transparencies
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Photo paper sizes (imperial)4x6, 5x7 \
Borderless printing media sizes4x6, 5x7, A4, Letter
Maximum ISO A-series paper sizeA4
Display-
Market positioningHome & office
Standard interfacesUSB 2.0, Wireless LAN
USB 2.0 ports quantity1
Internal memory32 MB
Compatible memory cardsMemory Stick (MS), MS Duo, MS PRO, MS PRO Duo
Sound pressure level (printing)50 dB
Power consumption (off)0.65 W
Power consumption (standby)4 W
Power consumption (average operating)19 W
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesENERGY STAR

Related product manuals