Introduction
5
1
Setting up Brother Web Connect 1
Step-by-step overview 1
Configure the settings using the following procedure:
The machine can now use the service.
Step 1: Create an account with the desired service (see page 6).
Access the service’s website
using a computer and create
an account. (If you already
have an account, there is no
need to create an additional
account.)
Step 2: Apply for Brother Web Connect access (see page 6).
Start Brother Web Connect
access using a computer and
obtain a temporary ID.
Step 3: Register (on the machine), the account information that is needed to access the desired services
(see page 8).
Enter the temporary ID to
enable the service on the
machine. Specify the account
name as you would like it to be
displayed on the machine, and
enter a PIN if you would like to
use one.
Web serviceObtain account
User registration
Brother Web Connect
application page
Obtain temporary ID
Enter account information
Web service
Enter temporary ID
To Next Page
Loading...
Need help?
General
