Brother MFC-J4320DW

Troubleshooting
49
B
d Lift the Jam Clear Flap, and remove the
jammed paper.
e Make sure you look carefully inside the
machine above and below the Jam
Clear Flap for scraps of paper.
f Put the paper tray firmly back in the
machine.
g Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover (1) into the open position.
h Slowly pull the jammed paper (1) out of
the machine.
i Move the print head (if necessary) to
take out any paper remaining in this
area. Make sure paper scraps are not
left in the corners of the machine (1)
and (2).
1
1
1
2