2
a Remove the protective tape and film covering
the machine, and also from the LCD.
b Remove the plastic bag a containing the ink
cartridges from on top of the paper tray.
c Make sure you have all the components.
2
Load plain A4 paper
a Pull the paper tray a completely out of the
machine.
b Open the output paper tray cover a.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d Fan the stack of paper well to avoid paper jams
and misfeeds.
1
Always make sure that the paper is not curled or
wrinkled.
1
2
3
3
To Next Page
Loading...
Need help?
General
