EasyManuals Logo

Brother MFC-J432W User Manual

Brother MFC-J432W
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
5
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
a Make sure that the power is turned on.
The LCD will show No Ink Cartridge.
b Open the ink cartridge cover a.
c Remove the orange protective part a.
d Unpack the ink cartridge.
Turn the green release lever on the orange
protective packing a clockwise until it clicks to
release the vacuum seal. Then remove the
orange protective packing a as shown.
Note
Make sure you install the Starter Ink Cartridge
included with your machine first.
Note
Do not throw away the orange protective part.
You will need it if you transport the machine.
1
IMPORTANT
DO NOT shake the ink cartridges. If ink stains
your skin or clothing, wash with soap or
detergent at once.
1
11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J432W and is the answer not in the manual?

Brother MFC-J432W Specifications

General IconGeneral
BrandBrother
ModelMFC-J432W
CategoryAll in One Printer
LanguageEnglish

Related product manuals