EasyManuals Logo

Brother MFC-J432W User Manual

Brother MFC-J432W
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
4
Set your country
(Australia and New
Zealand only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a Check that the power is turned on by
connecting in the power cord.
b Press a or b to choose your country
(Australia or New Zealand), and press
OK.
c
If the LCD shows the correct country, press
a
or
b
to select
Yes
, and press
OK
. Then go to step
d
.
Or press
a
or
b
to select
No
, and press
OK
. Then
go back to step
b
and choose the country again.
d
After the LCD shows
Accepted
for a few
seconds, the machine will restart automatically.
After the restart, the LCD shows
Please Wait
.
IMPORTANT
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to External TAD if you
have an external answering machine. See
Choose a Receive Mode on page 8. (Detailed
information uuBasic User’s Guide: Connecting
an external TAD (telephone answering device))
1
2
(Example for Australia)
(Example for Australia)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J432W and is the answer not in the manual?

Brother MFC-J432W Specifications

General IconGeneral
BrandBrother
ModelMFC-J432W
CategoryAll in One Printer
LanguageEnglish

Related product manuals