Chapter 2
14
b Open the output paper tray cover (1).
c Gently press and slide the paper
guides (1) to fit the paper size.
Make sure that the triangular mark (2)
on the paper guide (1) lines up with the
mark for the paper size you are using.
d Fan the stack of paper well to avoid
paper jams and misfeeds.
Always make sure that the paper is not
curled or wrinkled.
e Gently put the paper into the paper tray
print side down.
Check that the paper is flat in the tray.
Using Letter, A4 or Executive
Landscape orientation
2
Be careful not to push the paper in too far;
it may lift at the back of the tray and cause
paper feed problems.
1
1
2
To Next Page
Loading...
