Brother MFC-J4410DW - Page 29

Configuring your machine for a wireless network
23
3
h The machine will search for your network and display a list of available SSIDs.
Swipe up or down to display <New SSID>. Press <New SSID>, and then press OK.
i Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.)
Press OK.
j Press Ad-hoc when instructed.
k Choose the Encryption type None or WEP.
Do one of the following:
If you choose None, go to step m.
If you choose WEP, go to step l.
l Enter the WEP key you wrote down in step a on page 22. Press OK. Go to step m. (For information on
how to enter text, see the Quick Setup Guide.)
m To apply the settings, press Yes. To cancel, press No.
Do one of the following:
If you choose Yes, go to step n.
If you choose No, go back to step h.
n The machine starts to connect to the wireless device you have chosen.
o A connection result message appears for 60 seconds on the LCD and a wireless LAN report will
automatically be printed. If the connection failed, check the error code on the printed report.
See Quick Setup Guide: Troubleshooting
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX in the
CD-ROM.