Brother MFC-J4410DW - Page 25

Scanning
21
3
h The application will search your network and display a list of available machines. Tap your machine in
the list.
i Do one of the following:
 To change other scan settings, see Scan Settings on page 26. After changing the settings, go to
step j.
 If you do not want to change any settings, press the Back button and go to step j.
j Tap Scan.
The machine will start to scan the document. The scanned image will then be displayed on the screen.
Confirm the scanned image.
NOTE
• Tap the screen to hide or show the operation buttons.
• Tap or to view the previous or next page.
k Do one of the following:
 To crop the scanned image, tap and then go to step l.
 If you do not want to crop the scanned image, go to step n.
l The area inside the box will be cropped.
 To change the size of the box, drag the edge of the box.
 To move the position of the box, tap inside the box and drag the box.
When finished, tap Done.
m Confirm the cropped image. To start over and select the size of the box again, tap and then go
back to step l.