EasyManuals Logo

Brother MFC-J4535DW User Manual

Brother MFC-J4535DW
635 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #310 background imageLoading...
Page #310 background image
The Registrar is usually the wireless LAN access point/router.
The settings page may differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows 7, Windows 8.1, or Windows 10 computer as a Registrar, complete the
following steps:
7. Do one of the following:
Windows 10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
Windows 8.1
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > Devices and Printers > Add a device.
Windows 7
Click
(Start) > Devices and Printers > Add a device.
To use a Windows 7, Windows 8.1, or Windows 10 computer as a Registrar, you must register it to your
network in advance. For more information, see the instructions supplied with your wireless LAN access
point/router.
If you use Windows 7, Windows 8.1, or Windows 10 as a Registrar, you can install the printer driver
after the wireless configuration by following the on-screen instructions. To install the driver and software
necessary to use your machine, go to your model's Downloads page at support.brother.com.
8. Select your machine and click Next.
9. Type the PIN displayed on the machine's LCD, and then click Next.
10. (Windows 7) Select your network, and then click Next.
11. Click Close.
MFC-J4535DW
1. Press
[Settings] > [Network] > [WLAN(Wi-Fi)] > [WPS/PIN Code].
2. When [Enable WLAN?] appears, press [Yes].
The wireless setup wizard starts. To cancel, press [No].
3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
4. Using a computer connected to the network, in your browser's address bar, type the IP address of the device
you are using as the Registrar. (For example: http://192.168.1.2)
5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
The Registrar is usually the wireless LAN access point/router.
The settings page may differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows 7, Windows 8.1, or Windows 10 computer as a Registrar, complete the
following steps:
6. Do one of the following:
Windows 10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
Windows 8.1
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > Devices and Printers > Add a device.
Windows 7
Click
(Start) > Devices and Printers > Add a device.
303

Table of Contents

Other manuals for Brother MFC-J4535DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J4535DW and is the answer not in the manual?

Brother MFC-J4535DW Specifications

General IconGeneral
Duplex printingYes
Print technologyInkjet
Maximum resolution1200 x 4800 DPI
Print speed (black, normal quality, A4/US Letter)- ppm
Duplex copying-
Maximum copy resolution1200 x 2400 DPI
Copy speed (black, normal quality, A4)13 cpm
Copy speed (color, normal quality, A4)10.5 cpm
Scan toE-mail, E-mail Server, FTP, File, Image, OCR
Scanner typeFlatbed & ADF scanner
Scan speed (black)17 ppm
Scan speed (color)7 ppm
Maximum scan resolution19200 x 19200 DPI
Printing colorsBlack, Cyan, Magenta, Yellow
Duplex functionsPrint
Maximum duty cycle6000 pages per month
Number of print cartridges4
Total input capacity150 sheets
Total output capacity100 sheets
Total number of input trays3
Auto document feeder (ADF) input capacity20 sheets
Paper tray media typesGlossy paper, Plain paper, Recycled paper
Paper tray media weight64 - 220 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
Photo paper sizes (imperial)3.5x5, 5x7, 5x8 \
Optional connectivityBluetooth, Ethernet, Near Field Communication (NFC), Wireless LAN
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithms802.1x RADIUS, EAP-FAST, EAP-MD5, EAP-TLS, EAP-TTLS, HTTPS, IPPS, IPSec, PEAP, SMTP-AUTH, SNMPv3, SSL/TLS
Ethernet LAN data rates10, 100 Mbit/s
Sound pressure level (printing)57 dB
DisplayLCD
Control typeTouch
Product colorGray
Market positioningHome & office
Power consumption (max)21 W
Power consumption (off)0.2 W
Power consumption (ready)3.5 W
Power consumption (standby)1.1 W
Power consumption (average operating)- W
Mac operating systems supportedMac OS X 10.8 Mountain Lion, MacOS
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supportedWindows 10, Windows 11, Windows 8
Package depth312 mm
Package width497 mm
Package height464 mm
Package weight12600 g
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth335 mm
Width435 mm
Height250 mm

Related product manuals