62
Transmission Verification Report
says RESULT:ERR OR.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get RESULT:E RROR on the Transmission
Verification Report, your machine may be out of memory.
To gain extra memory, you can turn off Memory Receive, print fax messages from
the machine’s memory or cancel a Delayed Fax or Polling Job. (See Online User’s
Guide.)
If the problem continues, ask the telephone company to check your telephone line.
If you often get transmission errors due to possible interference on the telephone
line, try changing the machine's Compatibility setting to Basic(for VoIP).
(See Telephone Line Interference or VoIP System on page 65.)
(For South Africa)
If you connect your machine to PBX or ISDN, set the menu setting of Telephone
Line Type to your telephone line type. (See Online User’s Guide.)
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction fluid
on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 33.)
Handling Incoming Calls
Difficulty Suggestions
The machine “hears” a voice as a
CNG Tone.
If Fax Detect is set to On, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax-receiving tones. Deactivate the machine by pressing .
Try avoiding this problem by turning Fax Detect to Off.
(See Online User’s Guide.)
Sending a fax call to the machine. If you answered on an extension or external telephone, press your Remote
Activation Code (the factory default is l 51 (l 91 for New Zealand)). If you
answered on an external telephone, press Fax Start, and then press Receive
to receive the fax. When your machine answers, hang up.
Custom features on a single line. If you have Call Waiting, Call Waiting/Caller ID, Caller ID, Voice Mail, an
answering machine, an alarm system or other custom feature on a single
telephone line with your machine, it may create a problem sending or receiving
faxes.
For example: If you subscribe to Call Waiting or another custom service and its
signal comes through the line while your machine is sending or receiving a fax, the
signal can temporarily interrupt the fax. Brother's ECM (Error Correction Mode)
feature should help overcome this problem. This condition is related to the
telephone system industry and is common to all devices that send and receive
information on a single, shared line with custom features. If avoiding a slight
interruption is crucial to your business, we recommend using a separate
telephone line with no custom features.
Sending Faxes (continued)
Difficulty Suggestions
To Next Page
Loading...
Need help?
General
Weight and Dimensions
