32
Macintosh
Wireless Network
Install the drivers & software (Mac OS X 10.4.11, 10.5.x, 10.6.x)
17
Before you install
a Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
18
Install MFL-Pro Suite
a Put the supplied installation CD-ROM into your
CD-ROM drive.
b Double-click the Start Here OSX icon to install.
c Choose Wireless Network Connection, and
then click Next.
d The Brother software will search for the Brother
device in your wireless network. If the machine
is configured for your network, choose the
device you want to install, and then click Next.
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/
• For Mac OS X 10.4.0 to 10.4.10 users,
upgrade to Mac OS X 10.4.11 - 10.6.x.
If your wireless settings fail, the Wireless Device
Setup Wizard will appear during the installation of
MFL-Pro Suite. Confirm your settings by following
the on-screen instructions. If you encounter this
failure, go to step 15-a on page 23 and setup the
wireless connection again.
To Next Page
Loading...
Need help?
General
