Home > Network > Advanced Network Features > Fax Using the Internet (I-Fax) > Configure Your Brother
Machine for Email or I-Fax > Receive an I-Fax Automatically
Receive an I-Fax Automatically
To receive an I-Fax automatically, use Web Based Management to configure receiving options, if needed.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
.
4. Click the Fax tab.
5. Click I-Fax in the left navigation bar.
6. Click E-mail Receive and configure the following settings:
• Auto Polling
• Polling Frequency
• Print Mail Header
• Delete/Read Receive Error Mail
• Send Delivery Notification (Receive)
There are two ways to receive email messages:
• POP3/IMAP4 receiving at regular intervals
• POP3/IMAP4 receiving, manually initiated
When using POP3/IMAP4 receiving, the machine polls your email server to receive data. Polling can occur at
set intervals (for example, you can configure the machine to poll the email server every ten minutes) or you
can manually poll the server.
7. When finished, click Submit.
434
To Next Page
Loading...
Need help?
General
Weight and Dimensions
