Home > Security > Send or Receive an Email Securely > Send or Receive an Email Securely Using SSL
TLS
Send or Receive an Email Securely Using SSL TLS
Your Brother machine supports SSL/TLS methods to send or receive an email via an email server that requires
secure SSL/TLS communication. To send or receive email via an email server that is using SSL/TLS
communication, you must configure SMTP over SSL/TLS, POP3 over SSL/TLS, or IMAP4 over SSL/TLS.
We recommend using Web Based Management to configure SSL/TLS.
Verify Server Certificate
Under SSL/TLS, if you choose SSL or TLS, the Verify Server Certificate check box will be selected
automatically.
• Before you verify the server certificate, you must import the CA certificate issued by the CA that signed
the server certificate. Contact your network administrator or your Internet Service Provider (ISP) to
confirm if importing a CA certificate is necessary.
• If you do not need to verify the server certificate, clear the Verify Server Certificate check box.
Port Number
If you select SSL or TLS for SMTP, POP3, or IMAP4, the Port value will be changed to match the protocol. To
change the port number manually, type the port number after you choose SSL or TLS for the SSL/TLS settings.
You must configure your machine's POP3/IMAP4/SMTP communication method to match the method used by
your email server. For details about your email server settings, contact your network administrator or your ISP.
501
To Next Page
Loading...
Need help?
General
Weight and Dimensions
