• To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to
make this a One Touch Shortcut. Follow the LCD instructions.
6. Press [Start].
7. If you are using the scanner glass, set the next page and then press [Continue]. If there are no more
pages to scan, press [Finish]. After you finish scanning, make sure you choose [Finish] before
removing the memory card or USB flash drive from the machine.
IMPORTANT
The LCD displays a message while reading the data. DO NOT unplug the power cord or remove the
memory card or USB flash drive from the machine while it is reading the data. You could lose your data or
damage the memory card or USB flash drive.
Related Information
• Scan Using the Scan Button on Your Brother Machine
• Compatible Media
104
To Next Page
Loading...
