Home > Routine Maintenance > Clean Your Brother Machine > Clean the Outside of the Machine
Clean the Outside of the Machine
IMPORTANT
• Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the machine.
• DO NOT use cleaning materials that contain ammonia.
• DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.
1. If the paper support flap is open, close it, and then close the paper support.
2. Pull the paper tray (1) completely out of the machine.
3. Wipe the outside of the machine with a dry, lint-free cloth to remove dust.
4. Lift the output paper tray cover and remove anything that is stuck inside the paper tray.
5. Wipe the inside and the outside of the paper tray with a dry, lint-free cloth to remove dust.
6. Close the output paper tray cover and slowly push the paper tray completely into the machine.
Related Information
• Clean Your Brother Machine
603
To Next Page
Loading...
Need help?
General
Weight and Dimensions
