3. Open the new ink cartridge bag for the color indicated on the LCD, and take out the ink cartridge.
IMPORTANT
DO NOT touch the ink cartridge in the area indicated (1); this can prevent the machine from detecting the
cartridge.
4. Insert the ink cartridge in the direction of the arrow on the label.
Each color has its own correct position.
5. Gently push the area marked “PUSH” until the ink cartridge locks into place, and then close the ink cartridge
cover.
The machine resets the ink dot counter.
If the LCD displays [No Ink Cartridge] or [Cannot Detect] after you install the ink cartridge, check
that the ink cartridge is installed correctly. Remove the ink cartridge and reinstall it slowly until it locks into
place.
592
To Next Page
Loading...
