Brother MFC-T4500DW - Page 51

Home > Paper Handling > Load Paper > Paper Settings > Change the Paper Size and Paper Type
Change the Paper Size and Paper Type
Set the Paper Size and Paper Type settings for the paper tray.
• To get the best print quality, set the machine for the type of paper you are using.
• When you change the size of the paper you load in the tray, you must change the Paper Size setting on the
LCD at the same time.
1. Press [Settings] > [All Settings] > [General Setup] > [Tray Setting].
2. Press the tray option you want.
3. Press [Paper Type].
4. Press a or b to display the paper type options, and then press the option you want.
5. Press [Paper Size].
6. Press a or b to display the paper size options, and then press the option you want.
7. Press
.
The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine.
When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.
Related Information
• Paper Settings
Related Topics:
• Load A4, Letter, or Executive Size Paper in Tray #1
• Load Photo Paper in Paper Tray #1
• Load Envelopes in Paper Tray #1
• Acceptable Paper and Other Print Media
• Error and Maintenance Messages
• Paper Handling and Printing Problems
44