6. Lift the Jam Clear Flap (2), and then clean the back side of the Paper Feed Rollers (1) with a soft lint-free
cloth moistened with water. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all
moisture.
7. Put the paper support firmly back in the machine. Make sure you fit the paper support into the channels.
8. Slowly push the paper tray completely into the machine.
9. Reconnect the power cord.
Do not use the machine again until the rollers are dry. Using the machine before the rollers are dry may
cause paper feed problems.
Related Information
• Clean Your Brother Machine
Related Topics:
• Paper Handling and Printing Problems
534
To Next Page
Loading...
