Brother MFC-T4500DW - Page 590

Level 1 Level 2 Level 3 Descriptions
Setup Receive Memory
Receive
- Set the machine to forward fax messages, to store incoming
faxes in the memory (so you can retrieve them while you are
away from your machine), or the cloud service.
If you select Fax Forward, or Forward to Cloud, you can turn on
the Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of received faxes.
Report Setting XMIT Report
- Select the initial setup for the Transmission Verification Report.
Journal
Period
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes, you
can set the time for the option.
If you select Every 7 Days, you can set the day of the week.
Print Document
- - Print received faxes stored in the machine's memory.
Remote Access
- - Set your own code for Remote Retrieval.
Dial Restriction Dial Pad
- Set the machine to restrict dialling when using the dial pad.
Address Book
- Set the machine to restrict the dialling when using the Address
Book.
Shortcuts
- Set the machine to restrict the dialling when using a Shortcut.
Remaining Jobs
- - Check which scheduled jobs are in the machine's memory and
cancel selected jobs.
Miscellaneous Caller ID
Type
- Switch the mode if Caller ID cannot be displayed normally.
Fax Mode
- Select the transmission process when sending/receiving the
faxes manually.
[Network]
[Settings] > [All Settings] > [Network]
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP BOOT Method
- Select the Boot method that best suits
your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration mode.
WINS Server
- Specify the IP address of the primary or
secondary WINS server.
DNS Server
- Specify the IP address of the primary or
secondary DNS server.
APIPA
- Set the machine to allocate the IP
address from the link-local address range
automatically.
IPv6
- Turn the IPv6 protocol on or off.
Ethernet
- - Select the Ethernet link mode.
Wired Status
- - View the current wired status.
MAC Address
- - View the machine's MAC address.
583