Brother Model KR-830 - Disassembling the Carriage

DISASSEMBLING THE CARRIAGE
1------------------ -- - -- ·· ---
I . Removing the carriage handle
1.1 Keep the handle down and remove the two right and left
handle
screws. Then the handle can be taken off the carriage.
2. Removing the carriage cover
2, I Loosen, from the back of the carriage, and remove the two
right and left
carriage cover clamp screws.
2.2. Pun off the carriage cover upward. Then the H.C.L knob, the
- 7-
Fig. 1
Name of parts
<D Handle
® Carriage cover
' ®·1 H.C.L knob
®·2 Plain lever knob
® ·3 Change knob
® Stitch dial cap
plain lever knob and
the change knob will come off.
2.3
Pull off upward the H.C.L knob spring mounted under the
H.C . L. knob.
3. Removing the sti tch dial
3
.1 Pull off the stitch dial cap upward.
3.2 Remove the fastening
screw and pull offthestitchdialupwud.