Brother P-TOUCH PT-H110 User Manual

FORMATTING KEYS
Press to change the font settings.
Press
to change the size settings.
Press
to change the style settings.
Press to select the frame design. See the
Frame designs table included in this insertion sheet.
NOTE
• To cancel operations, press .
• See the Font samples table included in this
insertion sheet.
• The actual printed font size depends on the tape
width, number of characters, and number of
input lines. When characters reach a minimum
size, the selected font defaults to a custom font
based on the Helsinki style. This allows you to
print labels using the smallest text possible on
narrow or multi-line labels.
• After pressing , "Accepted" is displayed for
approximately one second.
4
Font Key
/ Select the settings
Font Helsinki
Brussels
Florida
Size Key
/ Select the settings
Size Large
Medium
Small
Style Key
/ Select the settings
Style Normal
Bold
Outline
Shadow
Italic
I+Bold
I+Outline
I+Shadow
Vertical
V+Bold
Frame Key
/ Select a frame

Brother P-TOUCH PT-H110 Specifications

General

Model	PT-H110
Series	P-TOUCH
Device Category	Label Maker
Print Resolution	180 dpi
Tape Widths Supported	3.5 mm, 6 mm, 9 mm, 12 mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Number of Fonts	1
Number of Frames	10
Auto Power Off	Yes
Cutter Type	Manual
Print Method	Thermal Transfer
Maximum Print Height	9.0 mm
Print Speed	20 mm/sec
Font Styles	Normal, Bold, Outline, Shadow
Power Source	6 AAA batteries or optional AC adapter
Weight	790 g (without batteries)