GETTING STARTED (Continued)
This function allows you to set the brightness of
the LCD. You can select from five levels of
brightness.
The default setting is [0].
• To change back to default setting, press the
Space key.
• After pressing , "Accepted"
is displayed for
approximately one second.
BASIC USAGE
X Switching Upper Case/Lower Case
Press to switch between upper and lower
case text.
Upper case ( ON) Lower case ( OFF)
X Creating Two-Line Labels
Move the cursor to where you want to start the next
line and press . Use either 0.35" (9mm) or 0.47"
(12mm) wide tape for two line printing.
NOTE
• The return symbol ( ) is displayed when you
press the Enter key, indicating you have chosen to
input a second line of text.
X Entering Accented Characters
Press to add an accented character.
• See the table of accented characters included in
this insertion sheet.
• To cancel operations, press .
• The order of accented characters differs by the
selected LCD language.
Contrast
/ [LCD contrast]
/ [-2/-1/0/+1/+2]
To Next Page
Loading...
