Brother P-TOUCH PT-H110 User Manual

Insert six new AAA alkaline batteries (LR03) or
fully charged Ni-MH batteries (HR03), making
sure their poles point in the correct directions.
Users of alkaline batteries:
Always replace all six batteries at the same
time with brand new ones.
Users of Ni-MH batteries:
Always replace all six batteries at the same
time with fully charged ones.
1 Insert the two hooks at the bottom of the
cassette cover into the slots on the label
maker.
2 Securely close the cassette cover
making sure it snaps into place.
3
AC adapter jack
4

Brother P-TOUCH PT-H110 Specifications

General

Model	PT-H110
Series	P-TOUCH
Device Category	Label Maker
Print Resolution	180 dpi
Tape Widths Supported	3.5 mm, 6 mm, 9 mm, 12 mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Number of Fonts	1
Number of Frames	10
Auto Power Off	Yes
Cutter Type	Manual
Print Method	Thermal Transfer
Maximum Print Height	9.0 mm
Print Speed	20 mm/sec
Font Styles	Normal, Bold, Outline, Shadow
Power Source	6 AAA batteries or optional AC adapter
Weight	790 g (without batteries)