Brother PJ-763 - Menu Bar

Changing the Printer Settings
50
3
Menu Bar 3
1 Apply Settings to the Printer
Applies the settings to the printer.
2 Save Settings in Command File
Saves the specified settings in a command file. The file extension is .bin.
The saved command file can be used with the mass storage mode to apply the settings to a printer. (See
Mass Storage Mode on page 91.)
Note
If the [Disable these settings] check box is selected, the settings in that tab are not saved.
Important
• The following information is not saved with the settings commands:
• Node name
• IP address, subnet mask and default gateway (when the IP address is set to [STATIC])
• The saved communication settings commands are only intended to be used for applying settings to a
printer. The settings cannot be applied by importing this command file.
• Saved command files contain authentication keys and passwords. Take necessary measures to protect
saved command files, such as saving them in a location that cannot be accessed by other users.
• Do not send the command file to a printer whose model was not specified when the command file was
exported.
5
9
10
6
1
2
3
4
7
8